Office Building Repainting and Repair in Tam Binh, Vinh Long

TECO MSC is carrying out office building repainting and repair in Tam Binh, Vinh Long for a corporate client. The two-storey building sits in a walled compound with a parking shed, a warehouse and a generator house. The exterior paint had peeled and stained, and the walls showed many cracks. The office stays open throughout the works.

Office building repainting in Tam Binh, Vinh Long
Frame scaffolding with warning tape below work at height; the office stays open.

Existing condition

  • Peeling, chalking exterior paint, with mould at the wall base and on the boundary wall.
  • Hairline cracks across wall surfaces; cracks where walls meet beams, columns and the floor.
  • Signs of leaks at the base of the roof-terrace walls. Settled entrance steps.
  • Worn ancillary items: fence spikes, the folding gate, the warehouse metal-roof gutter.

Scope of work

  • Repaint the exterior and part of the interior of the main building.
  • Repaint the boundary wall, parking shed, warehouse, toilet block and generator house.
  • Repair wall cracks before painting.
  • Waterproof the base of the roof-terrace walls.
  • Repair the entrance steps, repaint the fence spikes, replace the automatic folding gate, install a stainless-steel gutter on the warehouse roof.

Safety and keeping the office running

  • Frame scaffolding with cross bracing, erected one wall face at a time; workers wear helmets and high-visibility vests.
  • Warning tape set out below every area of work at height.
  • Glass doors and windows covered before scraping and painting; glass cleaned afterwards.
  • Work moves wall by wall, and staff walkways stay clear.
  • Debris is bagged and hauled off site.

Construction steps

Removing the old paint

The old paint and putty are scraped and ground back to sound plaster with power tools: a handheld scraper on the boundary wall, a grinder on the building walls. The surfaces are then water-washed, which also shows up every crack.

Scraping old paint off the boundary wall with a handheld tool
Scraping old paint off the boundary wall with a handheld tool.
Power-scraping old paint on the boundary wall
Old paint on the boundary wall removed back to sound plaster.
Removing exterior paint from the office building on scaffolding
Removing exterior paint from scaffolding.
Office building exterior after old paint removal
The exterior after scraping, with every crack exposed.

Crack repair

  • Hairline cracks: cut open along the crack, primed with a bonding coat, refilled with exterior filler mixed with additive.
  • Cracks at the wall base and at beam/column junctions: plaster removed along the crack, a V-groove cut, filled with specialist sealant, anti-crack steel mesh fixed, then re-plastered with bonding-additive mortar.
Opening up cracks at the wall base
Opening up a crack at the wall base.
Crack repair before skim coating
Crack repair before skim coating.

Skim coat and sanding

One coat of exterior putty outside and interior putty inside – never one product for both. Once dry, the putty is sanded flat and dusted off before painting.

Sanding the exterior skim coat
Sanding the skim coat in the narrow gap between two blocks.
Skim-coating the office building exterior
Exterior putty on the first-floor wall.

Primer and finish coats

Jotun paint system, one primer and two finish coats: exterior paint outside, interior paint inside. Painting runs top-down, one wall face at a time.

Repainted boundary wall with fence spikes being refinished
Boundary wall after painting; fence spikes being de-rusted and repainted.

Other items

  • Polyurethane waterproofing at the base of the roof-terrace walls, with swelling waterstop tape at the junctions.
  • Settled entrance steps repaired and re-clad in stone.
  • Fence spikes de-rusted and repainted; damaged sections replaced.
  • Automatic stainless-steel folding gate replaced; stainless-steel gutter and downpipe installed on the warehouse roof.

Schedule

About 30 days on site. Works are in progress; completion photos will be added at handover.

Acceptance

Each item is inspected with the client’s representative: putty surface, paint colour uniformity, every repaired crack, the gutter and the roof-terrace wall base.

Related project: Office Roof Membrane Waterproofing – Compass II, VSIP 1.


Need an office or building repainted, waterproofed or repaired? TECO MSC surveys on site and works while the building stays in use, in Ho Chi Minh City and southern Vietnam. See our On-demand Maintenance and Waterproofing & Leak Repair services.

TECO MSC – the building maintenance division of TECO Architecture and Construction JSC.
Hotline: +84 911 111 929